Dell Wireless Mouse Not Working » Easy
The Dell Wireless Mouse allows computer users to control the cursor on the monitor screen without physically connecting it to the computer. But often users have a problem...
30/01/2022
The Dell Wireless Mouse allows computer users to control the cursor on the monitor screen without physically connecting it to the computer. But often users have a problem with
dell wireless mouse not working
.
After a period of regular use or due to computer restores. Sometimes your Dell Wireless Mouse does not work or the on-screen cursor may stop responding to mouse movement.
Unfortunately, the wireless mouse fails for unknown reasons, and it's unclear what to do in this type of situation.
The
recommendations and troubleshooting steps below
will help you fix and revive a mouse that isn't working.
When your wireless mouse also stops working –
Do not rush to despair, because in many cases everything can be fixed by yourself!
Dell Wireless Mouse Not Working Troubleshooting Steps
Contents
hide
How do I fix my Dell Wireless Mouse?
Reasons why the wireless mouse is not working
Other common reasons for wireless mice not working:
How do you know if a wireless mouse has a low battery?
How do I reset my Dell Wireless Mouse?
How do I know if my wireless mouse is dying?
Conclusion
This article will analyze the most common causes of this problem and how to fix them when the wireless mouse is not working and no longer responds to movement or pressure.
How can I fix my Dell Wireless Mouse?
Follow the steps below to repair Dell Wireless Mouse.
Step 1
Check the wireless connection with the Dell Wireless Mouse using USB receivers.
2nd step
Make sure the USB receiver is turned on. Some Dell models have a small button on the receiver. Press it and wait for the little light to come on. If the light does not appear, unplug the receiver and plug it into another USB port on the
housing
.
Step 3
Check the Bluetooth connection. Start looking at your Bluetooth icon (see Resources) at the bottom right of the desktop. You may need to click the small arrow to view all icons.
Step 4
Right-click on the Bluetooth logo and confirm that the connection is enabled. If not, select "
Make visible" or "Enable Bluetooth.
" Wait for the icon to light up. Press the small power button at the bottom of the mouse to sync the mouse.
Step 5
Turn off the mouse and remove the batteries. Put in new batteries. Most Dell wireless mice require AA alkaline batteries.
Step 6
Make sure the mouse is on a non-reflecting surface. It is possible to place a sheet of normal size printing paper under the mouse to prevent reflective surfaces from disturbing the optics of the mouse.
Step 7
Press the small connect button on the base of the mouse to make sure the mouse is powered on and receiving a signal from the USB or Bluetooth receiver. If you reset your receiver, computer, or Bluetooth connection, you may need to press this button one more time to pair your device.
Reasons why the wireless mouse is not working
If your Dell Wireless Mouse is still not working, it may have the following reasons.
1.
Mouse fell asleep in “sleep mode”
After some time of inactivity, many mouse models, including Dell, automatically turn off ("sleep mode") to save battery power. If you try to move it around the table at this time, the cursor on the monitor screen will not respond in any way.
To wake the mouse from sleep mode, simply press the mouse left or right. button. On some devices, there may be a particular button (above the wheel, as you can see in the image below).
3-Button MouseAs shown above, after pressing it (if everything is in command with the mouse), you will observe how the cursor has started to “run”. It is possible to rework!
2.
USB port problem
Consider removing the radio adapter from the USB port and plugging it into another port (if you have an option, connect the adapter to the USB ports on the back of the PC case).
Usually, it will not be superfluous to inspect the port itself. Try connecting another device like USB, phone, etc. to it. Moreover,
AAAAUUUUUGGGHHHH...how do I disable the f-ing mouse touchpad on this @Dell laptop before I toss it out the window. Fn+F5 is not working...
— Nick Bowman (包尼克) Tue Jun 05 20:50:10 +0000 2012
it is highly recommended
check the performance of the same mouse on different computers or laptops.
If the mouse is buggy, but the laser is on, this may be due to the contact between the receiver and the port selected for it. In the central unit, this type of nuisance such as the degradation of the performance of the connectors located on its front face is often encountered.
In this situation, it is enough to simply move the mouse receiver to the other place.
Fortunately, modern laptops are usually equipped with
high performance USB ports
3.0
on all sides
. So changing the connector will not notice any delay in performance. If after rearranging the mouse starts to work, there is a reason to consider fixing the front port. The nearest computer repair service center can help you.
3.
Battery problem
First, you need to start with a simple, turn the mouse over it and make sure the LED light is on on the back, and at the same time check if the switch is in the right position.
If everything is installed correctly and the laser is working, you should check the batteries. They are normally installed in two parts. New ones need to be added. You should not check batteries separately on small devices.
The fact is that even if the batteries are not fully discharged and can work on another device, changing them will not be enough for the full functioning of the mouse as a result, it can slow down and freeze or not work in any way .
4.
Flat batteries
The simple fact is that even "new" batteries can be implanted (it is unknown how long they have been in the store's warehouse, and how they have been stored).
Also, focus on the condition of the batteries. A friend of mine very “responsibly” wiped the desk, and apparently, after emptying it, he instantly put the keyboard and mouse in place, without letting the surface dry out.
Moisture has entered the batteries throughout the protective cover, and they have oxidized
- the mouse had to be changed.
If something similar happens to your mouse: remove the batteries and dispose of them. Next, try taking an old toothbrush, dipping it in alcohol, and cleaning off all that "white" residue (especially on the copper contacts where the batteries come in contact).
After installing a new set of batteries, verify functionality. If the mouse does not work, it will be more comfortable and economical to replace it with a new one.
5.
Lens cleaning
In the event the laser turns on and off, simply wiping the lens can help. Turn the computer assistant upside down and wash it with a dry cloth, wipe the dust off the lens and air dry several times.
You can even dip a cotton swab in alcohol and run it over the lens, then the signal will improve. Just be careful, don't use pressure when pressing the wand as it may damage your laser. A damp cotton ball will be able to collect all the dust on its own without excessive effort.
Other common reasons for wireless mice not working:
Consider running the Windows Troubleshooter.< /p>
Check if the mouse is mistakenly connected to another computer and laptop.
Check the status and update the mouse driver.
How do you know if a wireless mouse's battery is low?
To check the battery status, open Bluetooth devices in Settings by searching for them in the Windows search bar. Here you will see all wirelessly connected devices with their battery status.
How do I reset my Dell Wireless Mouse?
Steps to Reset Dell Wireless Mouse:
< p>Turn off your Dell Wireless Mouse.Hold down the mouse buttons.
Release the buttons after 5 seconds, you will see a flashing LED if it resets successfully.
How do I know if my wireless mouse is dying?
If your mouse suddenly stops working or the cursor moves randomly on the screen, these are signs of a dying mouse.
< p> Read also:
Optical vs Laser Mouse
, which is best for you, what is the difference?
Recommended< /p>
:Guide to
Different Types of Mouse Pad Sizes
» Small, Medium, Large, XL, XXL & Size 3XL.
Conclusion
The above troubleshooting steps and five reasons tell you about your
actual problem and solution to the problem with your Dell Wireless Mouse.
. However, if all of the above didn't help, your mouse has probably become unusable. So in this situation. Consider switching with a new mouse.
report this ad
Spread the information!